Care Instructions

Your board was finished with Watco Butcher Block Oil & Finish from Rustoleum. We use this product on all of our boards we build, as it has a nice sheen, and for its durability. The finish is a food grade poly that is easily cleaned with mild soap and water. You can re-apply this product if your boards starts to look worn or the colors are not as crisp as they were when you purchased the product. This product will preserve the wood to a certain extent, but we do not recommend leaving your board outside In the elements. Please note that our boards are not weather proof and should not be left outside.

We recommend cleaning your board with a mild dish soap and water. Towel dry and then stand your board on its side or end to thoroughly dry.

We recommend storing your board standing on end to prevent warping. Also please store in a climate controlled area of your home. If your board starts to show signs of wear, like knife marks and such, you can use 220 grit sandpaper to remove them, either by hand or with an orbital sander. Then finish off with 320 grit to give it an extra smooth finish. Then re-apply Watco Butcher Block Oil and finish. Watco is a wipe on product. This product can be found at any local hardware store or big box store like Home Depot or Lowes.

DOWNLOAD PRINTABLE INSTRUCTIONS